// Multiple Animations (with Adafruit GFX library)
//
// The sketch is from the Wokwi Animator: https://animator.wokwi.com/
//   The address of the OLED display was set to 0x3C
// The Christmas animations are from:
//   https://icons8.com/icons/set/christmas--style-glyph-neue--animated--mono
// A number of mono color GIF of 64x64 were downloaded.
// They were transferred into individual files with ImageMagick:
//   magick icons8-christmas.gif -coalesce ani_%03d.png
// Those png files were loaded into: https://javl.github.io/image2cpp/
//   Multiple files can be uploaded at once (I learned that today on the Wokwi Discord).
//   The Background color and Inverting colors is still confusing for me.
//   The resulting code was placed in a *.h file in the project.
//   The variables for the length and the array were adjusted.
// The sketch is further adapted to allow switching between animations by a button.
// 
// Is the u8g2 library better/faster ?
// This project by 'upir' uses u8g2:
//   https://wokwi.com/projects/374294166215201793

#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Bounce2.h>

#include "ani_sock.h"
#include "ani_ball.h"
#include "ani_bell.h"
#include "ani_champagne.h"
#include "ani_candle.h"
#include "ani_candy.h"
#include "ani_sparkle.h"

const int buttonPin = 9;

#define SCREEN_I2C_ADDR 0x3C // or 0x3C
#define SCREEN_WIDTH 128     // OLED display width, in pixels
#define SCREEN_HEIGHT 64     // OLED display height, in pixels
#define OLED_RST_PIN -1      // Reset pin (-1 if not available)

Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST_PIN);

#define FRAME_WIDTH  64
#define FRAME_HEIGHT 64

const int num_animations = 7;
int animation;

const unsigned char** frames;
int frame_count;
int frame;

unsigned long previousMillis; // millis-timer for animation
const unsigned long interval = 20; // interval for animation

const unsigned char** animations[num_animations] =
{
  sock_Array,
  ball_Array,
  bell_Array,
  champagneallArray,
  candleallArray,
  candy_Array,
  sparkleallArray,
};

int lengths[num_animations] =
{
  sock_Len,
  ball_Len,
  bell_Len,
  champagneallArray_LEN,
  candleallArray_LEN,
  candy_Len,
  sparkleallArray_LEN,
};

// INSTANTIATE A Button OBJECT FROM THE Bounce2 NAMESPACE
Bounce2::Button button = Bounce2::Button();

void setup() 
{
  button.attach(buttonPin, INPUT_PULLUP);
  button.interval(5); // interval in ms
  // How does the pressed state influence the fell() ?
  // button.setPressedState(LOW); 

  display.begin(SSD1306_SWITCHCAPVCC, SCREEN_I2C_ADDR);

  animation = 0;
  frames = animations[animation];
  frame_count = lengths[animation];
  frame = 0;
}

void loop() 
{
  unsigned long currentMillis = millis();

  // Update the Bounce instance
  button.update();

  if(currentMillis - previousMillis >= interval)
  {
    display.clearDisplay();
    display.drawBitmap(32, 0, frames[frame], FRAME_WIDTH, FRAME_HEIGHT, 1);
    display.display();

    frame++;
    if(frame >= frame_count)
      frame = 0;
  }

  if(button.fell())
  {
    animation++;

    if(animation >= num_animations)
      animation = 0;

    frames = animations[animation];
    frame_count = lengths[animation];
    frame = 0;
  }

  delay(5);  // speed up the Wokwi simulation
}