#include <Arduino.h>
#include <LovyanGFX.hpp>

// Custom setup class for LovyanGFX
class LGFX : public lgfx::LGFX_Device
{
    lgfx::Panel_ILI9341 _panel_instance_ILI;
    lgfx::Panel_ST7789 _panel_instance_ST;
    lgfx::Bus_SPI _bus_instance;
    lgfx::Light_PWM _light_instance;

public:
    LGFX(int num)
    {
        {
            auto cfg = _bus_instance.config();

            cfg.spi_host = VSPI_HOST;
            cfg.spi_mode = 0;
            cfg.freq_write = 40000000;
            cfg.freq_read = 16000000;
            cfg.spi_3wire = false;
            cfg.use_lock = true;
            cfg.dma_channel = 1;
            cfg.pin_sclk = 18;  // SPI SCK pin
            cfg.pin_mosi = 23;  // SPI MOSI pin
            cfg.pin_miso = 19;  // SPI MISO pin (optional)
            cfg.pin_dc = 2;     // Data/Command pin

            _bus_instance.config(cfg);
            _panel_instance_ILI.setBus(&_bus_instance);
        }

        {
            auto cfg = _panel_instance_ILI.config();

            cfg.pin_cs = 15;    // Chip select pin
            cfg.pin_rst = 4;    // Reset pin
            cfg.pin_busy = -1;  // Busy pin (not used)

            cfg.panel_width = 240;
            cfg.panel_height = 320;
            cfg.offset_x = 0;
            cfg.offset_y = 0;
            cfg.offset_rotation = 0;
            cfg.dummy_read_pixel = 8;
            cfg.dummy_read_bits = 1;
            cfg.invert = false;
            cfg.rgb_order = false;
            cfg.dlen_16bit = false;
            cfg.bus_shared = true;

            _panel_instance_ILI.config(cfg);
        }

        {
            auto cfg = _light_instance.config();

            cfg.pin_bl = 33;   // Backlight pin
            cfg.invert = false;
            cfg.freq = 44100;
            cfg.pwm_channel = 7;

            _light_instance.config(cfg);
            _panel_instance_ILI.setLight(&_light_instance);
        }

        setPanel(&_panel_instance_ILI);
    }
};

LGFX tft;

void setup() {
    Serial.begin(115200);
    tft.init(2);
    tft.setRotation(0); // Set rotation to 0, adjust as needed
    tft.fillScreen(TFT_BLACK);
    tft.setCursor(0, 0);
    tft.setTextColor(TFT_WHITE);
    tft.setTextSize(2);
    tft.println("Hello, world!");
}

void loop() {
    // Nothing to do in loop
}