#include <WiFi.h>
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#include "Adafruit_MQTT.h"
#include "Adafruit_MQTT_Client.h"

// -------SENSOR PINS---------
#define TEMP_SENSOR 4
#define PH_SENSOR 35
#define WATER_LEVEL 34

// ---SAFE RANGE CONSTANTS FOR FOR FISH POND PARAMETERS-------
#define SAFE_PH_MIN 6.8
#define SAFE_PH_MAX 8.2

#define SAFE_TEMP_MIN 24
#define SAFE_TEMP_MAX 30

#define WATER_OK 80
#define WATER_MID 40

// ------- LEDs FOR SAFE STATUS INDICATION -------------
#define LED_R 15
#define LED_Y 2
#define LED_G 0
#define BUZZER 16


//----------------------------------------
#define AIO_SERVER       "io.adafruit.com"
#define AIO_SERVERPORT    1883
#define AIO_USERNAME  "Holuwaferanmi"
#define AIO_KEY       "aio_oHqM34c3GcbwZMoaNRfIRoCKsgyU"

WiFiClient client;

LiquidCrystal_I2C LCD = LiquidCrystal_I2C(0x27, 16, 2);

// oneWire instance to communicate with DS18B20 sensor
OneWire oneWire(TEMP_SENSOR);
DallasTemperature tempSensor(&oneWire); // Pass our oneWire reference to Dallas Temperature sensor 

// Setup the MQTT client class by passing in the WiFi client and MQTT server and login details.
Adafruit_MQTT_Client mqtt(&client, AIO_SERVER, AIO_SERVERPORT, AIO_USERNAME, AIO_KEY);

Adafruit_MQTT_Publish ph_feed = Adafruit_MQTT_Publish(&mqtt, AIO_USERNAME "/feeds/ph-level");
Adafruit_MQTT_Publish temp_feed = Adafruit_MQTT_Publish(&mqtt, AIO_USERNAME "/feeds/temperature");
Adafruit_MQTT_Publish waterL_feed = Adafruit_MQTT_Publish(&mqtt, AIO_USERNAME "/feeds/water-level");

float temp;
float pH_val;
const char *water_status[] = {"LOW", "MID", "OK"};
float water_level = 0;

//icon for termometer
byte thermometer_icon[8] =
{
    B00100,
    B01010,
    B01010,
    B01110,
    B01110,
    B11111,
    B11111,
    B01110
};

byte water_icon[8] = //icon for water droplet 
{
    B00100,
    B00100,
    B01010,
    B01010,
    B10001,
    B10001,
    B10001,
    B01110,
};

void monitorParams(){
   // Read temperature from DS18B20 sensor
  tempSensor.requestTemperatures();
  temp = tempSensor.getTempCByIndex(0);

  // Read pH Value
  int pH_adc = analogRead(PH_SENSOR);
  pH_val = (float)pH_adc * 14.0 / 4095;
  // pH_val = map(pH_adc, 0, 4095, 0.0, 14.0);

  // Read Water level  value
  int wLevel_adc = analogRead(WATER_LEVEL);
  water_level = map(wLevel_adc, 0, 4095, 100, 0);
}

void display(){
  // refresh only if value changes
  static float temp_d = temp;
  static float pH_val_d = pH_val;
  static int water_level_d = water_level;
  
  if (temp_d != temp || pH_val_d != pH_val || water_level_d != water_level){
    // LCD.clear();
    temp_d = temp;
    pH_val_d = pH_val;
    water_level_d = water_level;
  }

  static String pH_status = "Unknown!";

  if(pH_val>=6.8 && pH_val<=7.8)
    pH_status = "Good";
  else if(pH_val<=6.7)
    pH_status = "ACIDIC!";
  else
    pH_status = "ALKALINE!";

  LCD.home();
  // LCD.print("pH:"+String(pH_val, 1)+" Temp:"+String(temp, 1)+"C ");
  LCD.print("pH:");
  LCD.print(pH_val, 1);
  LCD.print(" " + pH_status + "     ");

  LCD.setCursor(0, 1);
  LCD.write(1);
  LCD.print(" " + String(temp, 1) + "C ");
  LCD.write(2); 
  LCD.print(" " + String((uint8_t) water_level)+"%   ");

  // Turn ON RGB LED accordingly
  static uint32_t led_time_prev = millis();

  if ((water_level >= WATER_OK) && (temp>=SAFE_TEMP_MIN && temp<=SAFE_TEMP_MAX) && (pH_val>=6.8 && pH_val<=7.8) && (pH_status == "Good")) {
    // Turn ON Green LED
    digitalWrite(LED_R, 0);
    digitalWrite(LED_Y, 0);
    digitalWrite(LED_G, 1);
  } else if((water_level>=WATER_MID && water_level<WATER_OK) || (temp>=SAFE_TEMP_MIN-4 && temp<SAFE_TEMP_MIN) || (temp>SAFE_TEMP_MAX && temp<=SAFE_TEMP_MAX+2)) {
    // Turn ON Yellow LED
    digitalWrite(LED_R, 0);
    digitalWrite(LED_Y, 1);
    digitalWrite(LED_G, 0);
  } else {
    // Blink Red LED
    if (millis() - led_time_prev >= 100) {
      digitalWrite(LED_R, !digitalRead(LED_R));
      digitalWrite(BUZZER, !digitalRead(BUZZER));
      led_time_prev = millis();
    }
    digitalWrite(LED_Y, 0);
    digitalWrite(LED_G, 0);
  }
}

void cloudUpdate() {
  static uint32_t prev_time;
  const uint32_t update_interval = 5000;

  if (millis() - prev_time >= update_interval) {
    if (mqtt.connected()) {
      // publish all parameters to clou
      ph_feed.publish(pH_val);
      temp_feed.publish(temp);
      waterL_feed.publish(water_level);
    } else {
      // reconnect to the MQTT server
      int8_t status;
    
      if (!mqtt.connected() && WiFi.status() == WL_CONNECTED) {
        Serial.print("Connecting to MQTT... ");
      
        if ((status = mqtt.connect()) == 0) {
          Serial.println("connected");
        } else {
          Serial.print("failed, status code =");
          Serial.print(mqtt.connectErrorString(status));
          Serial.println(" try again in 5 seconds");
        }
      }
    }
    prev_time = millis();
  }
}

void setup() {
  // put you setup code here, to run once:
    // Start the DS18B20 sensor
  tempSensor.begin();
  
  // LED pins init
  pinMode(LED_R, OUTPUT);
  pinMode(LED_Y, OUTPUT);
  pinMode(LED_G, OUTPUT);
  pinMode(BUZZER, OUTPUT);
  digitalWrite(LED_R, 0);
  digitalWrite(LED_Y, 0);
  digitalWrite(LED_G, 0);
  digitalWrite(BUZZER, 1);
  

  // LCD init
  LCD.init();
  LCD.backlight();
  LCD.createChar(1, thermometer_icon);
  LCD.createChar(2, water_icon);
  LCD.home();
  LCD.print("   Fish Pond    ");
  LCD.setCursor(0, 1);
  LCD.print("    Monitor     ");
  delay(2000);
  digitalWrite(BUZZER, 0);
  
  // WiFi Init
  LCD.clear();
  LCD.setCursor(0, 0);
  LCD.print("Connecting to ");
  LCD.setCursor(0, 1);
  LCD.print("WiFi...");
  
  WiFi.begin("Wokwi-GUEST", "", 6);

  // Wait 10s max for WiFi fo connect
  uint32_t time_start = millis();
  while (millis() - time_start <= 10000) {
    if (WiFi.status() == WL_CONNECTED){
      break;
    }
    delay(10);
  }

  LCD.clear();
  if (WiFi.status() == WL_CONNECTED){
    LCD.print("WiFi Connected!");
  } else {
    LCD.print("WiFi connection");
    LCD.setCursor(0, 1);
    LCD.print("Failed !");
  }

  delay(2000);
  LCD.clear();

  analogReadResolution(12);             // 12-bit resolution
  analogSetAttenuation(ADC_11db);       // Extend input range to ~3.9V
}

void loop() {
  // put your main code here, to run repeatedly:
  monitorParams();
  display();
  cloudUpdate();
  // delay(10); // this speeds up the simulation
}