#include <Servo.h>
Servo monServo;
#define TRIG_PIN 8
#define ECHO_PIN 7


void setup() {
  Serial.begin(9600);
  pinMode(TRIG_PIN, OUTPUT);
  pinMode(ECHO_PIN, INPUT);
  monServo.attach(9); // Liaison du servo au pin 9
  monServo.write(0);

}

void loop() {
  long duration;
  float distance;

  // Envoi d'une impulsion TRIG
  digitalWrite(TRIG_PIN, LOW);
  delayMicroseconds(2);

  digitalWrite(TRIG_PIN, HIGH);
  delayMicroseconds(10);
  digitalWrite(TRIG_PIN, LOW);

  // Lecture ECHO (durée en microsecondes)
  duration = pulseIn(ECHO_PIN, HIGH);

  // Calcul de la distance en cm
  distance = duration * 0.0343 / 2;

  Serial.print("Distance : ");
  Serial.print(distance);
  Serial.println(" cm");

  delay(500);
  if (distance <5)
  {
      monServo.write(90);
  }
  else 
  {
      monServo.write(0);
  }
}