// Program to demonstrate the MD_Parola library
//
// Demonstrates how UTF-8 multi-byte characters can be mapped to Extended ASCII
// characters that can be displayed with a suitable font file.
//
// MD_MAX72XX library can be found at https://github.com/MajicDesigns/MD_MAX72XX
//

#include <MD_Parola.h>
#include <MD_MAX72xx.h>
#include <SPI.h>
#include "Parola_Fonts_data.h"

// Define the number of devices we have in the chain and the hardware interface
// NOTE: These pin numbers will probably not work with your hardware and may
// need to be adapted
#define HARDWARE_TYPE MD_MAX72XX::PAROLA_HW
#define MAX_DEVICES 8

#define CLK_PIN   13
#define DATA_PIN  11
#define CS_PIN    10

#define BUF_SIZELD 128

// Hardware SPI connection
//MD_Parola P = MD_Parola(HARDWARE_TYPE, CS_PIN, MAX_DEVICES);
// Arbitrary output pins
MD_Parola P = MD_Parola(HARDWARE_TYPE, DATA_PIN, CLK_PIN, CS_PIN, MAX_DEVICES);

const uint16_t PAUSE_TIME = 2000;

int loopmsg = 0;

// Turn on debug statements to the serial output
#define  DEBUG  1

#if  DEBUG
#define PRINT(s, x) { Serial.print(F(s)); Serial.print(x); }
#define PRINTS(x) Serial.print(F(x))
#define PRINTX(s, x)  { Serial.print(F(s)); Serial.print(x, HEX); }
#else
#define PRINT(s, x)
#define PRINTS(x)
#define PRINTX(s, x)
#endif

// Global variables
char	pc[][20] =
{
  "abc…ABC",
//  "äöüßÄÖÜ",
//  "50€/kg³",
//  "Español",
//  "30m/s²",
//  "Français",
//  "20µs/°C",
};

char ld_message[BUF_SIZELD] = { " " };
char message1[BUF_SIZELD] = { "température: 31.5°C - humidité: 81% " };
char message2[BUF_SIZELD] = { "deuxième message" };
char message3[BUF_SIZELD] = { "troisième message " };

uint8_t utf8Ascii(uint8_t ascii)
// Convert a single Character from UTF8 to Extended ASCII according to ISO 8859-1,
// also called ISO Latin-1. Codes 128-159 contain the Microsoft Windows Latin-1
// extended characters:
// - codes 0..127 are identical in ASCII and UTF-8
// - codes 160..191 in ISO-8859-1 and Windows-1252 are two-byte characters in UTF-8
//                 + 0xC2 then second byte identical to the extended ASCII code.
// - codes 192..255 in ISO-8859-1 and Windows-1252 are two-byte characters in UTF-8
//                 + 0xC3 then second byte differs only in the first two bits to extended ASCII code.
// - codes 128..159 in Windows-1252 are different, but usually only the €-symbol will be needed from this range.
//                 + The euro symbol is 0x80 in Windows-1252, 0xa4 in ISO-8859-15, and 0xe2 0x82 0xac in UTF-8.
//
// Modified from original code at http://playground.arduino.cc/Main/Utf8ascii
// Extended ASCII encoding should match the characters at http://www.ascii-code.com/
//
// Return "0" if a byte has to be ignored.
{
  static uint8_t cPrev;
  uint8_t c = '\0';

  PRINTX("\nutf8Ascii 0x", ascii);

  if (ascii < 0x7f)   // Standard ASCII-set 0..0x7F, no conversion
  {
    cPrev = '\0';
    c = ascii;
  }
  else
  {
    switch (cPrev)  // Conversion depending on preceding UTF8-character
    {
    case 0xC2: c = ascii;  break;
    case 0xC3: c = ascii | 0xC0;  break;
    case 0x82: if (ascii==0xAC) c = 0x80; // Euro symbol special case
    case 0xE2: 
      switch (ascii)
      {
      case 0x80: c = 133;  break;// ellipsis special case
      }
      break;

    default: PRINTS("!Unhandled! ");
    }
    cPrev = ascii;   // save last char
  }

  PRINTX(" -> 0x", c);

  return(c);
}

void utf8Asciix(char* s)
// In place conversion UTF-8 string to Extended ASCII
// The extended ASCII string is always shorter.
{
  uint8_t c;
  char *cp = s;

  PRINT("\nConverting: ", s);

  while (*s != '\0')
  {
    c = utf8Ascii(*s++);
    if (c != '\0')
      *cp++ = c;
  }
  *cp = '\0';   // terminate the new string
}

void setup(void)
{
#if DEBUG
  Serial.begin(57600);
#endif
  PRINTS("\n[Parola UTF-8 display Test]");

  // Do one time in-place conversion of the strings to be displayed
  //for (uint8_t i=0; i<ARRAY_SIZE(pc); i++)
  //  utf8Ascii(pc[i]);
  //for (uint8_t i=0; i<ARRAY_SIZE(ld_message); i++)
    
  // Initialise the Parola library
  P.begin();
  P.setInvert(false);
  P.setPause(PAUSE_TIME);
  P.setFont(ExtASCII);
  P.displayText(ld_message, PA_LEFT, 25, 2000, PA_SCROLL_LEFT, PA_SCROLL_LEFT);
  utf8Asciix(message1);
  strcpy(ld_message,message1);
}

void loop(void)
{
  if (P.displayAnimate())
  {
    if(loopmsg == 1){
      utf8Asciix(message1);
      strcpy(ld_message,message1);}
    if(loopmsg == 2){
      utf8Asciix(message2);
      strcpy(ld_message,message2);}
    if(loopmsg == 3){
      utf8Asciix(message3);
      strcpy(ld_message,message3);}
    
    P.displayReset();
    loopmsg++;
    if(loopmsg>3)
      loopmsg=1;
  }
  
}