//----------- 第一顆 74595 控制七段顯示資料 abcdefg dot
//----------                              Q0------Q7
#define DATA1  2
#define ST_CP1 3
#define SH_CP1 4
//----------- 第二顆 74595 控制七段顯示資料 最左邊七段 最右邊七段 共同點
//----------                              Q7..............Q0
#define DATA2  5
#define ST_CP2 6
#define SH_CP2 7
//------------ 4 個按鈕控制
#define BT1  14
#define BT2  15
#define BT3  16
#define BT4  17
//--------------------------------------------------------
byte pinout[]={DATA1,ST_CP1,SH_CP1,DATA2,ST_CP2,SH_CP2};
byte pininput[]={BT1,BT2,BT3,BT4};


void setup() {
  // put your setup code here, to run once:
 
 for(int i=0;i<(sizeof(pinout)/sizeof(byte));i++)
     pinMode(pinout[i], OUTPUT);
 for(int i=0;i<(sizeof(pininput)/sizeof(byte));i++)
     pinMode(pininput[i], INPUT_PULLUP);

Serial.begin(115200);
}

byte seg[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x27,0x7f,0x6f, //0~9
            0x77,0x7c,0x39,0x5e,0x79,0x71,0x00,0x76};//A b C d E F off H
byte Buff[]={0,5,0,0,0,0,0,0};
byte sacn[]={0x80,0x40,0x20,0x10,0x08,0x04,0x02,0x01};

void datashow()
{ 
 digitalWrite(ST_CP1,LOW);
 shiftOut(DATA1,SH_CP1,MSBFIRST,0x00);
 digitalWrite(ST_CP1,HIGH); 

 digitalWrite(ST_CP2,LOW);
 shiftOut(DATA2,SH_CP2,MSBFIRST,0x00);
  digitalWrite(ST_CP2,HIGH); 
}

void loop() {
  // put your main code here, to run repeatedly:

digitalWrite(ST_CP1,LOW);
shiftOut(DATA1,SH_CP1,MSBFIRST,~0x3f);
digitalWrite(ST_CP1,HIGH); 

digitalWrite(ST_CP2,LOW);
shiftOut(DATA2,SH_CP2,MSBFIRST,0x80);
digitalWrite(ST_CP2,HIGH);

digitalWrite(ST_CP2,LOW);
shiftOut(DATA2,SH_CP2,MSBFIRST,0x00);
digitalWrite(ST_CP2,HIGH);


digitalWrite(ST_CP1,LOW);
shiftOut(DATA1,SH_CP1,MSBFIRST,~0x06);
digitalWrite(ST_CP1,HIGH); 

digitalWrite(ST_CP2,LOW);
shiftOut(DATA2,SH_CP2,MSBFIRST,0x40);
digitalWrite(ST_CP2,HIGH);

digitalWrite(ST_CP2,LOW);
shiftOut(DATA2,SH_CP2,MSBFIRST,0x00);
digitalWrite(ST_CP2,HIGH);

digitalWrite(ST_CP1,LOW);
shiftOut(DATA1,SH_CP1,MSBFIRST,~0x76);
digitalWrite(ST_CP1,HIGH); 

digitalWrite(ST_CP2,LOW);
shiftOut(DATA2,SH_CP2,MSBFIRST,0x01);
digitalWrite(ST_CP2,HIGH);

digitalWrite(ST_CP2,LOW);
shiftOut(DATA2,SH_CP2,MSBFIRST,0x00);
digitalWrite(ST_CP2,HIGH);


}