//----------- 第一顆 74595 控制七段顯示資料 abcdefg dot
//----------                              Q0------Q7
#define DATA1  2
#define ST_CP1 3
#define SH_CP1 4
//----------- 第二顆 74595 控制七段顯示資料 最左邊七段 最右邊七段 共同點
//----------                              Q7..............Q0
#define DATA2  5
#define ST_CP2 6
#define SH_CP2 7
//------------ 4 個按鈕控制
#define BT1  14
#define BT2  15
#define BT3  16
#define BT4  17
//--------------------------------------------------------
byte pinout[]={DATA1,ST_CP1,SH_CP1,DATA2,ST_CP2,SH_CP2};
byte pininput[]={BT1,BT2,BT3,BT4};


void setup() {
  // put your setup code here, to run once:
 
 for(int i=0;i<(sizeof(pinout)/sizeof(byte));i++)
     pinMode(pinout[i], OUTPUT);
 for(int i=0;i<(sizeof(pininput)/sizeof(byte));i++)
     pinMode(pininput[i], INPUT_PULLUP);

Serial.begin(115200);
}

byte seg[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x27,0x7f,0x6f, //0~9
            0x77,0x7c,0x39,0x5e,0x79,0x71,0x00,0x76};//A b C d E F off H
byte Buff[]={16,16,16,16,16,16,16,16};
byte scan[]={0x80,0x40,0x20,0x10,0x08,0x04,0x02,0x01};

void disp(byte number7s,byte data7s)
{ 
 digitalWrite(ST_CP1,LOW);
 shiftOut(DATA1,SH_CP1,MSBFIRST,~seg[data7s]);
 digitalWrite(ST_CP1,HIGH); 

 digitalWrite(ST_CP2,LOW);
 shiftOut(DATA2,SH_CP2,MSBFIRST,scan[number7s]);
  digitalWrite(ST_CP2,HIGH); 

digitalWrite(ST_CP2,LOW);
shiftOut(DATA2,SH_CP2,MSBFIRST,0x00);
digitalWrite(ST_CP2,HIGH);  
}

byte no=0;
void show()
{ 
 
    disp(no,Buff[no]);
    no=(no+1)%8;
 
}
unsigned long showdataM=0;
int distime=0;
//---------------------------------------------------------------------
void showdata()
{
  if (millis()-showdataM >= 600 )
  {
    showdataM=millis();    
    distime=(1+distime)%15;

    if (distime<5)
    {
    Buff[0]=2;Buff[1]=0;Buff[2]=2;Buff[3]=6;
    Buff[4]=0;Buff[5]=2;Buff[6]=2;Buff[7]=7;
    }else if (distime>=5&&distime<=9)
    {
    Buff[0]=1;Buff[1]=2;Buff[2]=3;Buff[3]=4;
    Buff[4]=0;Buff[5]=0;Buff[6]=0;Buff[7]=7;
    }else
    {    
    Buff[0]=10;Buff[1]=11;Buff[2]=12;Buff[3]=13;
    Buff[4]=14;Buff[5]=15;Buff[6]=16;Buff[7]=16;
    }
  }
  
}
unsigned long counterM=0;
long count=99999995;
//---------------------------------------------------------------------
void counter()
{
  if (millis()-counterM >= 200 )
  {
    counterM=millis();    
    Buff[0]=count/10000000%10;
    Buff[1]=count/1000000%10;
    Buff[2]=count/100000%10;
    Buff[3]=count/10000%10;
    Buff[4]=count/1000%10;
    Buff[5]=count/100%10;
    Buff[6]=count/10%10;
    Buff[7]=count%10;
    count=(1+count)%100000000; // 0~99999999  }
  }
}
//---------------------------------------------------------
void loop() 
{
  // put your main code here, to run repeatedly:

show();
//showdata();
counter();

}