/* 
PROGRAMA QUE ENCIENDE 
Y APAGA EL LED CONECTADO AL PIN 2
*/
#define LED_VERDE 23
#define LED_ROJA 21
#define LED_AMARILLA 22
#define LED2_VERDE 19
#define LED2_ROJA 5
#define LED2_AMARILLA 18
#define LED7_VERDE 4
#define LED8_VERDE 2

void setup() {
pinMode(LED_VERDE, OUTPUT);  //DEFINO EL GPI23 COMO SALIDA
pinMode(LED_ROJA, OUTPUT);   //DEFINO EL GPI21 COMO SALIDA
pinMode(LED_AMARILLA, OUTPUT);  //DEFINO EL GPI22 COMO SALIDA
pinMode(LED2_VERDE, OUTPUT); //DEFINO EL GPI19 COMO SALIDA
pinMode(LED2_ROJA, OUTPUT);  //DEFINO EL GPI5 COMO SALIDA
pinMode(LED2_AMARILLA, OUTPUT);  //DEFINO EL GPI18 COMO SALIDA
pinMode(LED7_VERDE, OUTPUT);   //DEFINO EL GPI4 COMO SALIDA
pinMode(LED8_VERDE, OUTPUT);   //DEFINO EL GPI2 COMO SALIDA
}

void loop() {
digitalWrite(LED_VERDE, HIGH);   //ENCIENDE LED PIN GPI23
digitalWrite(LED_ROJA, LOW);    //APAGA LED PIN GPI21
digitalWrite(LED_AMARILLA, LOW);  //APAGA LED PIN GPI22
digitalWrite(LED2_ROJA, LOW);   //APAGA LED PIN GPI5
digitalWrite(LED2_VERDE, LOW);   //APAGA LED PIN GPI19
digitalWrite(LED2_AMARILLA, LOW);   //APAGA LED PIN GPI18
digitalWrite(LED7_VERDE, LOW);   //APAGA LED PIN GPI4
digitalWrite(LED8_VERDE, LOW);   //APAGA LED PIN GPI2
delay(100);  //RETARDO 100 MILI SEGUNDOS
digitalWrite(LED_AMARILLA, LOW);  //ENCIENDE LED PIN GPI22
digitalWrite(LED_VERDE, HIGH);  //APAGA LED PIN GPI23
digitalWrite(LED_ROJA, LOW);    //APAGA LED PIN GPI21
digitalWrite(LED2_ROJA, LOW);   //ENCIENDE LED PIN GPI5
digitalWrite(LED2_VERDE, HIGH);   //APAGA LED PIN GPI19
digitalWrite(LED2_AMARILLA, LOW);   //APAGA LED PIN GPI18
digitalWrite(LED7_VERDE, LOW);   //APAGA LED PIN GPI4
digitalWrite(LED8_VERDE, LOW);   //APAGA LED PIN GPI2
delay(100);  //RETARDO 100 MILI SEGUNDOS
digitalWrite(LED_AMARILLA, HIGH);   //APAGA LED GPI22
digitalWrite(LED_ROJA, LOW);    //APAGA LED PIN GPI21
digitalWrite(LED_VERDE, HIGH);  //APAGA LED PIN GPI23
digitalWrite(LED2_ROJA, LOW);   //ENCIENDE LED PIN GPI5
digitalWrite(LED2_VERDE, HIGH);   //APAGA LED PIN GPI19
digitalWrite(LED2_AMARILLA, LOW);   //APAGA LED PIN GPI18
digitalWrite(LED7_VERDE, LOW);   //APAGA LED PIN GPI4
digitalWrite(LED8_VERDE, LOW);   //APAGA LED PIN GPI2
delay(100);  //RETARDO 100 MILI SEGUNDOS
digitalWrite(LED_AMARILLA,HIGH);   //ENCIENDO LED GPI22
digitalWrite(LED_ROJA, LOW);    //APAGA LED PIN GPI21
digitalWrite(LED_VERDE, HIGH);  //APAGA LED PIN GPI23
digitalWrite(LED2_ROJA, LOW);   //ENCIENDE LED PIN GPI5
digitalWrite(LED2_VERDE,HIGH);   //APAGA LED PIN GPI19
digitalWrite(LED2_AMARILLA, HIGH);   //APAGA LED PIN GPI18
digitalWrite(LED7_VERDE, LOW);   //APAGA LED PIN GPI4
digitalWrite(LED8_VERDE, LOW);   //APAGA LED PIN GPI2
delay(100);  //RETARDO 100 MILI SEGUNDOS
digitalWrite(LED_VERDE, HIGH);  //APAGA LED PIN GPI23
digitalWrite(LED_ROJA, HIGH);   //APAGA LED GPI21
digitalWrite(LED_AMARILLA,HIGH);   //ENCIENDO LED GPI22
digitalWrite(LED2_ROJA, LOW);   //APAGA LED PIN GPI5
digitalWrite(LED2_VERDE, HIGH);   //APAGA LED PIN GPI19
digitalWrite(LED2_AMARILLA, HIGH);   //APAGA LED PIN GPI18
digitalWrite(LED7_VERDE, LOW);   //APAGA LED PIN GPI4
digitalWrite(LED8_VERDE, LOW);   //APAGA LED PIN GPI2
delay(100);  //RETARDO 100 MILI SEGUNDOS
digitalWrite(LED_VERDE, HIGH);  //APAGA LED PIN GPI23
digitalWrite(LED_ROJA, HIGH);   //APAGA LED GPI21
digitalWrite(LED_AMARILLA,HIGH);   //ENCIENDO LED GPI22
digitalWrite(LED2_ROJA, HIGH);   //APAGA LED PIN GPI5
digitalWrite(LED2_VERDE, HIGH);   //APAGA LED PIN GPI19
digitalWrite(LED2_AMARILLA, HIGH);   //APAGA LED PIN GPI18
digitalWrite(LED7_VERDE, LOW);   //APAGA LED PIN GPI4
digitalWrite(LED8_VERDE, LOW);   //APAGA LED PIN GPI2
delay(100);  //RETARDO 100 MILI SEGUNDOS
digitalWrite(LED_VERDE, HIGH);  //APAGA LED PIN GPI23
digitalWrite(LED_ROJA, HIGH);   //APAGA LED GPI21
digitalWrite(LED_AMARILLA,HIGH);   //ENCIENDO LED GPI22
digitalWrite(LED2_ROJA, HIGH);   //APAGA LED PIN GPI5
digitalWrite(LED2_VERDE, HIGH);   //APAGA LED PIN GPI19
digitalWrite(LED2_AMARILLA, HIGH);   //APAGA LED PIN GPI18
digitalWrite(LED7_VERDE, HIGH);   //APAGA LED PIN GPI4
digitalWrite(LED8_VERDE, LOW);   //APAGA LED PIN GPI2
delay(100);  //RETARDO 100 MILI SEGUNDOS
digitalWrite(LED_VERDE, HIGH);  //APAGA LED PIN GPI23
digitalWrite(LED_ROJA, HIGH);   //APAGA LED GPI21
digitalWrite(LED_AMARILLA,HIGH);   //ENCIENDO LED GPI22
digitalWrite(LED2_ROJA, HIGH);   //APAGA LED PIN GPI5
digitalWrite(LED2_VERDE, HIGH);   //APAGA LED PIN GPI19
digitalWrite(LED2_AMARILLA, HIGH);   //APAGA LED PIN GPI18
digitalWrite(LED7_VERDE, HIGH);   //APAGA LED PIN GPI4
digitalWrite(LED8_VERDE, HIGH);   //APAGA LED PIN GPI2
delay(100);  //RETARDO 100 MILI SEGUNDOS
}