/**
 * ECE 315 Computer Interfacing
 * 
 * @file main.c
 * @details A simple FreeRTOS template to start projects.
 *          A producer-consumer task pair blinks the built-in LED.
 * @author Steven Knudsen, CCID knud
 * @copyright 2025, University of Alberta
 * @version   1.0
 * @licence   MIT
 */
#include "main.h"

/**
 * uncomment to enable the blocking task
 */
//#define WITH_BLOCKING 1

/*
 * GLOBALS
 */
// This is the inter-task queue
volatile QueueHandle_t queue = NULL;

// Set a delay time of exactly 500ms
const TickType_t ms_delay = 500 / portTICK_PERIOD_MS;

// Our tasks
TaskHandle_t pico_producer_task_handle  = NULL;
TaskHandle_t pico_consumer_task_handle  = NULL;

TaskHandle_t blocking_task_handle  = NULL;

/*
 * FUNCTIONS
 */

/**
 * @brief Return number of milliseconds since program start
 */
uint64_t get_ms_freertos(){
  return xTaskGetTickCount()/portTICK_PERIOD_MS;
}

/**
 * @brief Block to show preemption
 */
void blocking_task(void* unused_arg) {
    while (true) {
      printf("%-9llums blocking task\n",get_ms_freertos());
      vTaskDelay(ms_delay);
    }
}

/**
 * @brief Repeatedly flash the Pico's built-in LED.
 */
void led_task_consumer(void* unused_arg) {

  // This variable will take a copy of the value
  // added to the FreeRTOS xQueue
  uint8_t passed_value_buffer = 0;

  // Configure the Pico's on-board LED
  gpio_init(PICO_DEFAULT_LED_PIN);
  gpio_set_dir(PICO_DEFAULT_LED_PIN, GPIO_OUT);

  while (true) {
    // Check for an item in the FreeRTOS xQueue
    if (xQueueReceive(queue, &passed_value_buffer, portMAX_DELAY) == pdPASS) {
      // Received a value so flash the GPIO LED accordingly
      // (NOT the sent value)
            
      printf("%-9llums consume %d\n",get_ms_freertos(),passed_value_buffer);
      gpio_put(PICO_DEFAULT_LED_PIN, passed_value_buffer == 1 ? 0 : 1);
    }
  }
}

/**
 * @brief Repeatedly flash the Pico's built-in LED.
 */
void led_task_producer(void* unused_arg) {

  // Store the Pico LED state
  uint8_t pico_led_state = 0;

  while (true) {
    // Add the LED state to the FreeRTOS xQUEUE
    pico_led_state = !pico_led_state; // toggle LED state
    printf("%-9llums produce %d\n",get_ms_freertos(),pico_led_state);
    xQueueSendToBack(queue, &pico_led_state, 0);
    vTaskDelay(ms_delay);
  }
}

/*
 * RUNTIME START
 */
int main() {

  // Enable STDIO
  stdio_init_all();

  // Set up two tasks
  // Store handles referencing the tasks; get return values
  // NOTE Arg 3 is the stack depth -- in words, not bytes
  BaseType_t prod_status = xTaskCreate(led_task_producer,
                                       "PICO_PRODUCER_TASK",
                                       1024,
                                       NULL,
                                       1,
                                       &pico_producer_task_handle);
  BaseType_t con_status = xTaskCreate(led_task_consumer,
                                       "PICO_CONSUMER_TASK",
                                       1024,
                                       NULL,
                                       1,
                                       &pico_consumer_task_handle);
#if WITH_BLOCKING                        
  BaseType_t block_status = xTaskCreate(blocking_task,
                                       "BLOCKING_TASK",
                                       1024,
                                       NULL,
                                       1,
                                       &blocking_task_handle);
#else
  BaseType_t block_status = pdPASS;
#endif

  // Set up the event queue
  queue = xQueueCreate(4, sizeof(uint8_t));

  // Start the FreeRTOS scheduler
  // Only proceed with valid tasks
  if (prod_status == pdPASS || con_status == pdPASS || block_status == pdPASS) {
      vTaskStartScheduler();
  }

  // We should never get here, but just in case...
  while(true) {
      // NOP
  }
}