// Senses of the Bio-Avatar: Calibration Mode
const int trigPin = 5;
const int echoPin = 18;

void setup() {
  Serial.begin(115200);
  pinMode(trigPin, OUTPUT);
  pinMode(echoPin, INPUT);
  Serial.println("--- Bio-Avatar: Calibration Mode ---");
  Serial.println("Move the object in Wokwi and record the values.");
}

void loop() {
  // Clear the trigPin
  digitalWrite(trigPin, LOW);
  delayMicroseconds(2);
  
  // Trigger the sensor
  digitalWrite(trigPin, HIGH);
  delayMicroseconds(10);
  digitalWrite(trigPin, LOW);
  
  // Read the echoPin (Raw Data in microseconds)
  long rawData = pulseIn(echoPin, HIGH);
  
  // Print for Excel
  Serial.print("Raw Data (X): ");
  Serial.println(rawData);
  
  delay(1000); // Wait 1 second between measurements
}