import time
import json
import random
from umqtt.simple import MQTTClient
import network

# Paramètres MQTT
SERVER = "192.168.1.1"
CLIENT_ID = "testexmple"
TOPIC_DHT = "home/dht"
TOPIC_RELAY1 = "home/relay1"
TOPIC_RELAY2 = "home/relay2"
MQTT_USER = "user1"
MQTT_PASSWORD = "user123@"
MQTT_PORT = 1885 #Port MQTT origine : 1883
# WiFi
WIFI_SSID = "nyhome5G"
WIFI_PASSWORD = "bm@1574d"

# État simulé des relais
relay1_state = "OFF"
relay2_state = "OFF"

# Connexion WiFi
def connect_wifi():
    wlan = network.WLAN(network.STA_IF)
    wlan.active(True)
    if not wlan.isconnected():
        print("Connexion WiFi...")
        wlan.connect(WIFI_SSID, WIFI_PASSWORD)
        while not wlan.isconnected():
            pass
    print("Connecté WiFi :", wlan.ifconfig())

# Simuler données capteurs
def read_fake_sensor():
    temperature = round(random.uniform(20, 40), 1)
    humidity = random.randint(30, 70)
    return temperature, humidity

# Publier température et humidité uniquement
def publish_sensor_data(temp, hum):
    data = {
        "temperature": temp,
        "humidity": hum
    }
    mqtt_client.publish(TOPIC_DHT, json.dumps(data))
    print("Publié sur", TOPIC_DHT, ":", data)

# Callback : recevoir commandes relais1 / relais2
def on_message(topic, message):
    global relay1_state, relay2_state
    topic = topic.decode("utf-8")
    print("Message reçu - Topic:", topic, "Message:", message)
    try:
        data = json.loads(message.decode("utf-8"))
        if "etat" in data:
            etat = data["etat"].upper()
            if topic == TOPIC_RELAY1:
                relay1_state = "ON" if etat == "ON" else "OFF"
                print("→ Relais 1 :", relay1_state)
            elif topic == TOPIC_RELAY2:
                relay2_state = "ON" if etat == "ON" else "OFF"
                print("→ Relais 2 :", relay2_state)
    except Exception as e:
        print("Erreur de décodage JSON :", e)

# Connexion
connect_wifi()

mqtt_client = MQTTClient(CLIENT_ID, SERVER, port=MQTT_PORT, user=MQTT_USER, password=MQTT_PASSWORD)
#mqtt_client = MQTTClient(CLIENT_ID, SERVER, port=MQTT_PORT, user=MQTT_USER, password=MQTT_PASSWORD, keepalive=60, ssl=True, ssl_params={"server_hostname": SERVER})
mqtt_client.set_callback(on_message)
mqtt_client.connect()
mqtt_client.subscribe(TOPIC_RELAY1)
mqtt_client.subscribe(TOPIC_RELAY2)
print("Connecté MQTT et abonné aux relais.")

# Boucle principale
while True:
    try:
        # Simuler lecture capteur
        temp, hum = read_fake_sensor()

        # Publier uniquement les capteurs
        publish_sensor_data(temp, hum)

        # Vérifier messages MQTT pour relais
        mqtt_client.check_msg()

        time.sleep(3)
    except Exception as e:
        print("Erreur :", e)
        time.sleep(1)