#include <LCD_I2C.h>

LCD_I2C lcd(0x27, 16, 2);

byte corre1[] = { B01100, B01100, B00000, B01110, B11100, B01100, B11010, B10011 };
byte corre2[] = { B01100, B01100, B00000, B01100, B01100, B01100, B01100, B01110 };
byte pulo[] = { B01100, B01100, B00000, B11110, B01101, B11111, B10000, B00000 };

void setup() {
  lcd.begin();
  lcd.backlight();
  pinMode (A0,INPUT_PULLUP);
  lcd.createChar(0, corre1);
  lcd.createChar(1, corre2);
  lcd.createChar(2, pulo);
  lcd.print ("ALUNO");  //COLOQUE AQUI O NOME DO ALUNO
  lcd.setCursor (0,1);
  lcd.print ("BASE MAIOR");
}

void loop() {
  lcd.setCursor (13,1);
  lcd.write (0);
  delay (200);
  lcd.setCursor (13,1);
  lcd.write (1);
  delay (200);

    if (digitalRead(A0) == LOW )
    {
      lcd.setCursor (13,1);
      lcd.print (" ");
      lcd.setCursor (13,0);
      lcd.write (2);
      delay (200);
      lcd.setCursor (13,0);
      lcd.print (" ");
      lcd.setCursor (13,1);
      lcd.write (0);
      delay (200);
      lcd.setCursor (13,1);
      lcd.print (" ");
      lcd.setCursor (13,0);
      lcd.write (2);
      delay (200);
      lcd.setCursor (13,0);
      lcd.print (" ");     
    }
}