int LED[] = {2,4,17,5,18};
#define SW 14

void setup() {
  Serial.begin(115200);
  for(int i = 0 ; i <= 4 ; i = i + 1){
    pinMode(LED[i], OUTPUT);
    pinMode(SW, INPUT);
    pinMode(34, INPUT);
    pinMode(35, INPUT);
  }
}
 void loop() {
  int VR1 = map(analogRead(34),0,4095,1,3);
  int VR2 = map(analogRead(35),0,4095,1,10);

  Serial.print("Mode ");
  Serial.print(VR1);
  Serial.print(" Round ");
  Serial.print(VR2);
  Serial.print(" SW ");
  Serial.println(digitalRead(SW));

  if(digitalRead(SW) == 1){
    for(int i = 1 ; i <= VR2 ; i = i + 1){
      if(VR1 == 1 ){
      digitalWrite(LED[0],1);
      digitalWrite(LED[1],1);
      digitalWrite(LED[2],1);
      digitalWrite(LED[3],1);
      digitalWrite(LED[4],1);
      delay(300);
      digitalWrite(LED[0],0);
      digitalWrite(LED[1],0);
      digitalWrite(LED[2],0);
      digitalWrite(LED[3],0);
      digitalWrite(LED[4],0);
      delay(300);
    }

  if(VR1 == 2 ){
    for(int i = 0 ; i <= 4 ; i = i + 1){
      digitalWrite(LED[i],1);
      delay(300);
    }
      digitalWrite(LED[0],0);
      digitalWrite(LED[1],0);
      digitalWrite(LED[2],0);
      digitalWrite(LED[3],0);
      digitalWrite(LED[4],0);
      delay(300);
      }
      
  if(VR1 == 3 ){
    for(int i = 4 ; i >= 0 ; i = i - 1){
      digitalWrite(LED[i],1);
      delay(300);
    }
      digitalWrite(LED[0],0);
      digitalWrite(LED[1],0);
      digitalWrite(LED[2],0);
      digitalWrite(LED[3],0);
      digitalWrite(LED[4],0);
      delay(300);
      }
    }
  }
 }