from machine import Pin, I2C, UART
import ssd1306
import time

# -------------------------------
# OLED Setup (I2C)
# -------------------------------
i2c = I2C(0, scl=Pin(22), sda=Pin(21))

devices = i2c.scan()
if not devices:
    raise RuntimeError("No I2C devices found")

oled = ssd1306.SSD1306_I2C(128, 64, i2c)

# -------------------------------
# UART Setup
# -------------------------------
uart = UART(1, baudrate=9600, tx=Pin(17), rx=Pin(16))

# -------------------------------
# Display Function (Values + Emoji)
# -------------------------------
def show_reading(temp, hum):
    oled.fill(0)

    # Display sensor values
    oled.text("T:{:.1f}C".format(temp), 0, 0)
    oled.text("H:{:.1f}%".format(hum), 0, 10)
    oled.text("L:{}".format(ldr), 0, 20)

    # Display emoji based on conditions
    if temp > 35:
        oled.text("(>_<) Hot", 20, 40)     # Hot
    elif hum > 70:
        oled.text("(o_o) Wet", 20, 40)     # Humid
    else:
        oled.text("(^_^) Happy", 20, 40)   # Normal

    oled.show()

# -------------------------------
# Startup Screen
# -------------------------------
def show_waiting():
    oled.fill(0)
    oled.text("Waiting data...", 9, 15)
    oled.text("(^_^)", 40, 40)
    oled.show()

show_waiting()

# -------------------------------
# Main Loop (UART Reading)
# -------------------------------
while True:
    if uart.any():
        line = uart.readline()  # Read until newline
        
        if not line:
            continue

        try:
            text = line.decode().strip()
            print("Received:", text)

            # Expected format: temp,hum
            t_str, h_str, l_str = text.split(",")

            temp = float(t_str)
            hum = float(h_str)

            show_reading(temp, hum)

        except Exception as e:
            print("Parse error:", e, "Data:", line)

    time.sleep_ms(20)