#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#include <DHT.h>

//==================================================
// KONFIGURASI DHT22 & LCD
//==================================================
#define DHTPIN 2
#define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE);
LiquidCrystal_I2C lcd(0x27, 16, 2);

//==================================================
// DEKLARASI PIN
//==================================================
const int ldrPin = A0;
const int pirPin = 3;
const int buttonPin = 4;

const int lampPin = 5;      
const int fanPin = 6;       
const int alarmLed = 7;     
const int buzzerPin = 8;

//==================================================
// VARIABEL GLOBAL
//==================================================
int manualMode = 0; // 0: Auto, 1: Manual ON, 2: Manual OFF
const int ldrThreshold = 500;
unsigned long lastLCD = 0;
byte lcdPage = 0;

void setup() {
  Serial.begin(9600);
  dht.begin();
  
  lcd.init();
  lcd.backlight();

  pinMode(ldrPin, INPUT);
  pinMode(pirPin, INPUT);
  pinMode(buttonPin, INPUT_PULLUP);

  pinMode(lampPin, OUTPUT);
  pinMode(fanPin, OUTPUT);
  pinMode(alarmLed, OUTPUT);
  pinMode(buzzerPin, OUTPUT);

  lcd.setCursor(0,0);
  lcd.print("SMART CLASSROOM");
  lcd.setCursor(0,1);
  lcd.print("Initializing...");
  delay(2000);
  lcd.clear();
}

void loop() {

  // MEMBACA DATA SENSOR
  float suhu = dht.readTemperature();
  float hum = dht.readHumidity();
  int ldrValue = analogRead(ldrPin);
  bool adaOrang = digitalRead(pirPin);

  //==================================================
  // SOAL E: MODE MANUAL ( TIMEOUT 2 DETIK)
  //==================================================
  static bool lastButton = HIGH;
  bool button = digitalRead(buttonPin);
  static unsigned long waktuTombolDitekan = 0; // Deklarasi static agar nilai tersimpan

  if (lastButton == HIGH && button == LOW) {
    manualMode++;
    if (manualMode > 2) manualMode = 0;
    
    waktuTombolDitekan = millis(); 
    delay(250); 
  }
  lastButton = button;

  // Kembali otomatis ke mode 0 setelah 2 detik (2000 ms)
  if (manualMode != 0 && (millis() - waktuTombolDitekan >= 2000)) {
    manualMode = 0;
  }

  //==================================================
  // SOAL A: KONTROL LAMPU
  //==================================================
  bool lampStatus;
  if (manualMode == 1) {
    lampStatus = true;  
  } else if (manualMode == 2) {
    lampStatus = false; 
  } else {
    lampStatus = (ldrValue < ldrThreshold && adaOrang);
  }
  digitalWrite(lampPin, lampStatus);

  //==================================================
  // SOAL B: VENTILASI OTOMATIS
  //==================================================
  bool fanStatus = (!isnan(suhu) && suhu > 30);
  digitalWrite(fanPin, fanStatus);

  //==================================================
  // SOAL C: ALARM SUHU TINGGI
  //==================================================
  bool alarmStatus = (!isnan(suhu) && suhu > 35);
  digitalWrite(alarmLed, alarmStatus);
  
  if (alarmStatus) tone(buzzerPin, 1000);
  else noTone(buzzerPin);

  //==================================================
  // SOAL D: TAMPILAN LCD
  //==================================================
  if (millis() - lastLCD >= 3000) {
    lastLCD = millis();
    lcd.clear();

    switch (lcdPage) {
      case 0:
        lcd.setCursor(0,0);
        lcd.print("Suhu:");
        lcd.print(suhu,1);
        lcd.print((char)223);
        lcd.print("C");
        lcd.setCursor(0,1);
        lcd.print("Hum:");
        lcd.print(hum,0);
        lcd.print("%");
        break;

      case 1:
        lcd.setCursor(0,0);
        lcd.print("Lampu:");
        lcd.print(lampStatus ? "ON " : "OFF");
        lcd.setCursor(0,1);
        lcd.print("Kipas:");
        lcd.print(fanStatus ? "ON " : "OFF");
        break;

      case 2:
        lcd.setCursor(0,0);
        lcd.print(adaOrang ? "Ada Orang" : "Kosong   ");
        lcd.setCursor(0,1);
        
        // Tampilan LCD dipersingkat tanpa hitung mundur
        if (manualMode == 1) lcd.print("Mode: Man ON ");
        else if (manualMode == 2) lcd.print("Mode: Man OFF");
        else lcd.print("Mode: Auto   ");
        break;
    }

    lcdPage++;
    if(lcdPage > 2) lcdPage = 0;
  }

  delay(50); 
}