// CrowPanel Advanced 7" ESP32-P4 (DHE04107D) - plain GFX demo, no LVGL
// Requires: GFX Library for Arduino (moononournation)
// !! Fill in the pin map and panel timing from Elecrow's wiki/repo for this model !!
#include <Arduino_GFX_Library.h>
// ---------- PIN MAP (PLACEHOLDERS - replace from Elecrow docs) ----------
// Example layout for a parallel RGB panel; your board's values may differ.
#define GFX_DE -1
#define GFX_VSYNC -1
#define GFX_HSYNC -1
#define GFX_PCLK -1
#define GFX_R0 -1
#define GFX_R1 -1
#define GFX_R2 -1
#define GFX_R3 -1
#define GFX_R4 -1
#define GFX_G0 -1
#define GFX_G1 -1
#define GFX_G2 -1
#define GFX_G3 -1
#define GFX_G4 -1
#define GFX_G5 -1
#define GFX_B0 -1
#define GFX_B1 -1
#define GFX_B2 -1
#define GFX_B3 -1
#define GFX_B4 -1
// Panel bus (RGB parallel example; adjust timings to the panel datasheet)
Arduino_ESP32RGBPanel *bus = new Arduino_ESP32RGBPanel(
GFX_DE, GFX_VSYNC, GFX_HSYNC, GFX_PCLK,
GFX_R0, GFX_R1, GFX_R2, GFX_R3, GFX_R4,
GFX_G0, GFX_G1, GFX_G2, GFX_G3, GFX_G4, GFX_G5,
GFX_B0, GFX_B1, GFX_B2, GFX_B3, GFX_B4,
1 /* hsync polarity */, 160 /* h front porch */, 70 /* h pulse */, 160 /* h back porch */,
1 /* vsync polarity */, 12 /* v front porch */, 10 /* v pulse */, 23 /* v back porch */,
true /* pclk active neg */, 14000000 /* pclk Hz */, false /* big endian */, 0, 0, 0
);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
1024 /* width */, 600 /* height */, bus,
0 /* rotation */, true /* auto flush */
);
void setup() {
Serial.begin(115200);
delay(300);
if (!gfx->begin()) {
Serial.println("Display init FAILED - check pin map and timings");
while (true) delay(1000);
}
Serial.println("Display init OK");
gfx->fillScreen(BLACK);
// Title
gfx->setTextColor(WHITE);
gfx->setTextSize(4);
gfx->setCursor(40, 40);
gfx->println("CrowPanel 7\" P4 demo");
// Color bars
int w = 1024 / 4;
gfx->fillRect(0 * w, 200, w, 150, RED);
gfx->fillRect(1 * w, 200, w, 150, GREEN);
gfx->fillRect(2 * w, 200, w, 150, BLUE);
gfx->fillRect(3 * w, 200, w, 150, YELLOW);
// Shapes
gfx->drawCircle(512, 450, 100, CYAN);
gfx->fillCircle(512, 450, 40, MAGENTA);
}
void loop() {
static uint16_t hue = 0;
// Animated bar at the bottom
gfx->fillRect(0, 520, 1024, 40, BLACK);
gfx->fillRect(0, 520, hue % 1024, 40, WHITE);
hue += 8;
delay(30);
}Loading
esp32-p4-function-ev
esp32-p4-function-ev